top of page

USING INDUSTRY BEST PRACTICES TO DEVELOP AND TRAIN OUR EMPLOYEES, A GOOD CREW BECOMES A GOOD TEAM.

Certified pursues SAFETY through training, QUALITY through practice and EFFICENCY through experience.

CERTIFIED-BANNER-2_edited.jpg

“Great company to work for with some of the best kept equipment in the southeast” 

– Adam Hunt,  3 Year Employee

RIG MANAGER/TOOL PUSH

DUTIES

  • Operate company vehicle and equipment

  • Ensure company equipment is cleaned and organized

  • Ensure everyone on their crew is performing their assigned duties at all times

  • Ensure rig setup is performed correctly

  • Drive Equipment onto lease and watch for signals

  • Give signals to other drivers arriving on lease

  • Ensure jobs are done safely and per procedures

  • Communicate effectively with workers and oil company representative

  • Operate truck during rig move

  • Oversee all duties and paperwork necessary to perform each task

  • Communicate with Contractors, Consultants, and any other service companies

  • Order appropriate supplies

HEALTH & SAFETY

  • Ensure personal and crew safety training is kept up to date

  • Know and follow all appropriate rule and regulations

  • Ensure all equipment is inspected prior to use

  • Fill out Hazard assessment prior to each job

  • Communicate hazards with the crew

  • Conduct pre-job safety meetings

  • Fill out all applicable safety permits at each job site

  • Ensure all appropriate people have signed all permits

  • Ensure everyone on-site has appropriate PPE and it is in good condition

  • Be familiar with all safe work procedures and JSA’s

  • Ensure crew is updated with all safe work procedures and JSA’s

  • Ensure crew is performing their duties safely

  • Encourage the refusal or any work that is unsafe

  • Investigate any refusals of work

  • Report all accidents/incidents/near misses to Management

  • Coordinate all safety drills (man down/fire/etc)

  • Give jobs to crew for emergency response

  • Preform Rig inspections

  • Ensure all people in lease sign in and out and are accounted for

QUALIFICATIONS

  • Hold all relevant safety tickets

  • Previous Roughneck, Derrick, and Diller experience on Service Rig

  • At least 5-7 years experience on Service rig

  • Hold a 1A drivers license

  • Physically able to perform assigned duties

  • Supervisor training

DRILLER

DUTIES

  • Operate company equipment/vehicles

  • Ensure company equipment is cleaned and kept orderly

  • Ensure everyone is performing proper duties during rig setup

  • Run controls to level the rig during setup

  • Assist with any duties being performed (eg. railings, steps, floor, etc)

  • Drive equipment onto lease and watch for signals

  • Ensure jobs are done safely and per procedures

  • Operating Controls

  • Ensure all duties are being done properly

  • Communicate with workers and rig manager

  • Drive the rig during rig move

  • Overlook all duties on rig floor to ensure they are being performed correctly and safely

HEALTH & SAFETY

  • Ensure safety training is kept up to date

  • Follow all appropriate rules and regulations

  • Inspect equipment prior to use

  • Assist with hazard assessment prior to each job

  • Participate in pre-job safety meetings

  • Sign and be familiar with all applicable safety permits at each job site

  • Ensure you have appropriate PPE and it is in good condition

  • Be familiar with all safe work procedures and JSA’s

  • Ensure everyone is performing their duties correctly

  • Refuse any work that you feel is unsafe

  • Report all accidents/incidents/near misses to Rig Manager

  • Supervisor Training

QUALIFICATIONS

  • Hold all relevant safety tickets

  • Previous Roughneck, Derrick, and Diller experience on Service Rig

  • At least 5 years experience on Service rig

  • Hold a 1A drivers license

  • Physically able to perform assigned duties

  • Supervisor training

DERRICK HAND

DUTIES

  • Must be knowledgeable of the health and safety program and all rules and regulations we are to follow

  • Actively participate in the development, maintenance, teaching, and training of our health and safety program

  • Refuse to perform work that is unusually dangerous and work you are not familiar with, you must be informed and knowledgeable of your tasks, you must be fully competent and be able to teach your fellow co-workers

  • Report potential hazards to your driller

  • Actively participate in hazard identification and control.

  • Actively participate in our training and competency program.

  • Actively encourage a positive attitude on the work site

  • Immediately report all accidents, incidents, near misses, hazards, and damaged equipment.

  • Ensure all B.O.P, kill line, & pump inspections / tests are performed in accordance with all current rules, regulations, and recommended practices

  • Must be aware of the location of all of our safety equipment and how to use it all times

  • Responsible to rig in all derrick, and derrick rescue equipment prior to work starting on any job, all equipment must be inspected and the inspections must be documented

  • Responsible for the setting up and taking down of any catwalk and pipe racks on site

  • Responsible for ensuring all winterizing requirements are met at all times

  • Participate in all safety meetings and help your crew members to understand the hazards of each task

  • Participate in all daily rig inspections and ensure they are completed and documented properly

  • Ensure all equipment it kept clean, tidy, and in safe working condition

  • Notify the driller of all off site injuries prior to the commencement of work

  • Promote a safe, positive, healthy working attitude and environment at all times

HEALTH & SAFETY

  • Ensure safety training is kept up to date

  • Follow all appropriate rules and regulations

  • Inspect equipment prior to use

  • Assist with hazard assessment prior to each job

  • Participate in pre-job safety meetings

  • Sign and be familiar with all applicable safety permits at each job site

  • Ensure you have appropriate PPE and it is in good condition

  • Be familiar with all safe work procedures and JSA’s

  • Ensure everyone is performing their duties correctly

  • Refuse any work that you feel is unsafe

  • Report all accidents/incidents/near misses to Rig Manager

  • Supervisor Training

QUALIFICATIONS

  • Hold all relevant safety tickets

  • Previous Roughneck, Derrick, and Diller experience on Service Rig

  • At least 5 years experience on Service rig

  • Hold a 1A drivers license

  • Physically able to perform assigned duties

  • Supervisor training

ROUGHNECK/FLOORHAND

DUTIES

  • Assist in operation of company equipment/vehicles

  • Cleaning company equipment and keep things orderly

  • Assist in rig setup

  • Assist with guiding equipment onto lease (signals)

  • Ensure jobs are done safely and per procedures

  • Picking and laying pipe

  • Assist in rig take down

  • During rig move drive drillers truck or 5 ton if proper license is held

HEALTH & SAFETY

  • Ensure safety training is kept up to date

  • Assist with hazard assessment prior to each job

  • Participate in pre-job safety meetings

  • Sign and be familiar with all applicable safety permits at each job site

  • Ensure you have appropriate PPE and it is in good condition

  • Be familiar with all work procedures and JSA’s

  • Refuse any work that you feel is unsafe

  • Report all accidents/incidents/near misses to Rig Manager   

QUALIFICATIONS

  • Hold all relevant safety tickets

  • Previous oilfield experience is an assest

  • Encouraged to have a 1A drivers license

  • Physically able to perform laborious duties

bottom of page